What is the quick way to setup Canon printer to print wireless?
Hey, I am Oliver Brown, a blogger who loves to post various informative contents different technical troubles a Canon Printer user confronts. You must have read my different blogs dictating the specialized overview of problems with their accurate solutions. I am full of knowledge due to the practical dealing of various technical problems a printer device can generate for its users. There is a plethora of technical issues faced by Canon Printer users and their impact on them. My main aim is to let you aware of different troubles and the workaround followed right away.
Printer’s users hate the moment when they have to unpack the device to print something that are in need of. While if you have wireless printer, it allows remote access and enable instant printing, faxing and scanning without any hassle of attaching the whole device to the unit. But for this, you should have the right knowledge to set up your Printer to print wirelessly. If you are a Canon Printer user and are unable to setup Canon Printer wirelessly, this blog gives you the right information to do so. The router or access points feature an automatic connection button labeled WPS or Wi-Fi Protected Setup.
With the Wi-Fi Protected Setup, your Canon Printer will connect to the network and you don’t have any need to enter a password for that. You can follow the below given instructions for connecting your devices through WPS Connection Method. But, before anything else, you must be sure that the access point must have a physical WPS push button available. When you don’t see the WPS push button, you must go for the instructions on the Standard Connection Method tab. Also make sure that, your network should use the WPA (Wi-Fi Protected Access) or WPA2 security protocol. And then, follow the steps as mentioned below:
- Turn on your printing device if it is not.
- And then, press and hold the Wi-Fi button and or Wireless Connection button that must be present on the top of the printing device until the alarm lamp flashes once.
- Now, you need to ensure that the lamp that is present next to this button starts to flash blue. After that, proceed to your access point and press the WPS button within 2 minutes.
- You can also start the access point by following the refer guide in the correct manner.
- Thereafter, make sure that the blue Wi-Fi lamp on the printer will continue flashing while you search, and the power and Wi-Fi lamp will flash when you connect to the access point.
- When you see that the device has connected to the wireless network appropriately. You will see that the power and the Wi-Fi lamp wills stop flashing and remain lit.
I hope the above mentioned procedure has helped you in the right manner. If there is any doubt to clear, you should call Canon Printer Customer Care Number UK. They are so proficient that they can help you in a way no one can. But, in case, your router doesn’t support WPS, you need to apply the Standard Connection method.
If you are fond of the information given in this blog, you can like and share my blog for appreciating it. I will be back with another issue for sure.
Source:-
http://canonprintertollfree.blogspot.com/2018/10/what-is-quick-way-to-setup-canon.html
